Precision hot air station 70 W, 150 to 450 °C, with NH set and T260 pick and place - JBC JNA-2C

Hot air on an 01005 part often ends with the neighbourhood coming off as well. The JNA-2C holds airflow between 0.15 and 2.5 SLPM and temperature between 150 and 450 °C tightly enough that the heat stays where it is needed.

Benefits in use

• Rework on parts down to package size 01005 without lifting the neighbouring components.
• Airflow adjustable from 0.15 to 2.5 SLPM, temperature selectable from 150 to 450 °C.
• The cartridge type decides compatibility. The NH heated hose set takes cartridges of the J125 and J325 ranges.
• The T260 tool places and removes parts with an integrated suction pump at 53 % vacuum, equal to 397 mmHg.
• Equipotential bonding to the EPA and ESD safety to ANSI/ESD S20.20 make the station fit for the EPA.
• USB-A for firmware, graphics and profiles, USB-B for the PC, RJ12 for remote control or fume extraction, plus a pedal connection.

Applications

Removing and placing the smallest SMD parts, rework on densely populated assemblies, prototype and sample work, and repair benches where work happens under a magnifier.

Compatibility and scope of delivery

• NH heated hose set for cartridges of the J125 and J325 ranges
• T260 pick and place tool with integrated suction pump
• HPTE0C9SA high precision tweezers with ESD epoxy coating
• Hot air cartridges are wear parts and are ordered separately

Standards and compliance

ESD-safe to ANSI/ESD S20.20 with equipotential bonding to the EPA. Operating voltage 230 V. The station complies with CE requirements.