Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Festo vacuum component for safe gripping, holding and handling in automation.
Vacuum Generator OVEM-14-H-B-QO-CE-N-2P - Festo 539997
FESTO Original product
Net price (excl. VAT)
€762.82
Item FES-539997
Manufacturer no. OVEM-14-H-B-QO-CE-N-2P
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.OVEM-14-H-B-QO-CE-N-2P
EAN4052568178031
Customs tariff number84141089
ConditionNew
Article
FES-539997
Frequently Bought Together
- This Item: €762.82
- Vacuum Generator VN-07-H-T4-PQ2-VQ2-O1-P - Festo 536800 €139.86
- Vacuum Generator VN-07-L-T3-PQ2-VA4-RQ2 - Festo 193600 €38.24
Total price
Festo vacuum component for safe gripping, holding and handling in automation. The key technical data of this genuine Festo article are listed below.
| Nominal width laval nozzle [mm] | 1,40 |
| Pitch dimension [mm] | 20 |
| Construction type silencer type | open |
| installation position | arbitrary |
| Ejector characteristic | High vacuum<br>Standard |
| Filter porosity [µm] | 40 |
| Hand assist actuation | tentative<br>Additional via operating buttons |
| Integrated function | check valves<br>Silencer open<br>vacuum switch<br>Electrical switch on valve<br>Ejection impulse electrical<br>flow control valve (both directions)<br>filter<br>Air-saving function electrical |
| Construction set up | Modular |
| Short circuit resistance | yes |
| Measured parameter | Relative pressure |
| Measurement principle | Piezoresistive |
| Switching element function | NC contact<br>NO contact |
| Switch function | Window comparator<br>Threshold comparator |
| Valve function | closed |
| Reverse polarity protection | for all electrical connections |
| Control input to standard | IEC 61131-2 |
| Display type | Backlit LCD<br>4 digit alphanumeric |
| Display range [bar] [bar] | -0,999 |
| Presentable unit(s) | bar |
| Settings range hysteresis [bar] [bar] | -0,9 |
| Setting options | Via display and buttons |
| Switching position display | LCD |
| Switching status indicator | Visual |
| Settings range threshold value [bar] | -0,999 |
| Operating pressure [bar] | 2 to 8 |
| Operating pressure for max. vacuum [bar] | 3,6 |
| max. vacuum [%] | 93 |
| Nominal operating pressure [bar] | 6 |
| Max. suction volume current against atmosphere [l/min] | 50,5 |
| Venting time for nominal operating pressure [s] | 0,2 |
| Operating voltage range DC [V] | 20.4 to 27.6 |
| Power-on time | 100 % |
| Inductive protection circuit | adjusted to MZ, MY, ME coils |
| Insulation voltage [V] | 50 |
| Empty run current [mA] | < 70 mA |
| Max. output current [mA] | 100 |
| Residual current [mA] | 0,1 |
| Control output | 2xPNP |
| Voltage drop [V] | <= 1,5 V |
| Coil characteristic value | 24 V DC: Low current phase 0.3 W, high current phase 2,55 W |
| Surge voltage strength [kV] | 0,8 |
| Overload resistant | Available |
| Degree of contamination | 3 |
| Permission | RCM mark<br>c UL us - Listed (OL) |
| KC-mark | KC-EMV |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation not possible |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Medium temperature [°C] | 0 to 50 |
| Relative humidity | 5 - 85 % |
| Noise level for nominal operating pressure [dB(A)] | 77 |
| Protection category | IP65 |
| Protection class | III |
| ambient temperature [°C] | 0 to 50 |
| Max. tightening torque | 0.8 Nm with female thread<br>2.5 Nm with throughway bore |
| Product weight [g] | 380 |
| Pressure measurement range [bar] | -1 |
| Accuracy FS [%FS] | 3,0 |
| Reproducibility shifting time FS [%] | 0,6 |
| Switching logic inputs | PNP (Positive switching) |
| Electrical connection | M12x1<br>5 pin<br>Plug |
| Fastening type | With throughway bores<br>With female thread<br>With Accessories |
| Pneumatic connection 1 | QS-8 |
| Pneumatic connection 3 | Silencer integrated |
| vacuum connection | QS-8 |
| Material information | LABS containing materials included<br>RoHs compliant |
| Seals material | NBR |
| Capture nozzle material | POM |
| Filter material | PA<br>Web<br>Sintered steel |
| Filter housing material | PA reinforced |
| Housing material | Aluminium die casting<br>PA reinforced |
| Regulation screw material | Steel |
| Silencer material | Aluminium wrought alloy<br>PU foam |
| Screws material | Steel |
| Window material | PA |
| Plug housing material | brass, nickel-plated |
| Plug contacts material | brass, Gold plated |
| Pins material | Steel |
| Button field material | TPE-U |
| Screw connection material | brass, nickel-plated |
| Manufacturer Nr. | OVEM-14-H-B-QO-CE-N-2P |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568178031 |
| Weight | 0.600000 |
| HS-Code | 84141089 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Temperature (max.) | 50 |
| Material | Aluminium |
| Betriebsdruck max [bar] | 8.000000 |
| Pneumatic connection | QS-8 |
| Protection rating | IP65 |
| Series | OVEM |
| Dichtmaterial | NBR |
| Medium | Compressed air |
| Funktion | closed |
| Filterfeinheit [µm] | 40 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Mounting position | arbitrary |
| Design | Modular |
| Position sensing | No |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or
