The product may differ from the illustration
Festo vacuum component for safe gripping, holding and handling in automation.
Vacuum Generator OVEM-20-H-B-PO-CE-N-2P - Festo 8023702
FESTO Original product
Net price (excl. VAT)
€836.84
Item FES-8023702
Manufacturer no. OVEM-20-H-B-PO-CE-N-2P
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.OVEM-20-H-B-PO-CE-N-2P
EAN4052568258535
Customs tariff number84141089
ConditionNew
Article
FES-8023702
Frequently Bought Together
- This Item: €836.84
- Vacuum Generator VN-07-L-T3-PQ2-VQ2-RQ2 - Festo 193562 €31.96
- Vacuum Generator VN-05-L-T3-PQ2-VQ2-RO1-M - Festo 532619 €102.60
Total price
Festo vacuum component for safe gripping, holding and handling in automation. The key technical data of this genuine Festo article are listed below.
| Nominal width laval nozzle [mm] | 2,00 |
| Pitch dimension [mm] | 20 |
| Construction type silencer type | open |
| installation position | arbitrary |
| Ejector characteristic | High vacuum<br>Standard |
| Filter porosity [µm] | 40 |
| Hand assist actuation | tentative<br>Additional via operating buttons |
| Integrated function | check valves<br>Silencer open<br>vacuum switch<br>Electrical switch on valve<br>Ejection impulse electrical<br>flow control valve (both directions)<br>filter<br>Air-saving function electrical |
| Construction set up | Modular |
| Short circuit resistance | yes |
| Measured parameter | Relative pressure |
| Measurement principle | Piezoresistive |
| Switching element function | NC contact<br>NO contact |
| Switch function | Window comparator<br>Threshold comparator |
| Valve function | closed |
| Reverse polarity protection | for all electrical connections |
| Control input to standard | IEC 61131-2 |
| Display type | Backlit LCD<br>4 digit alphanumeric |
| Display range [bar] [bar] | -0,999 |
| Presentable unit(s) | bar |
| Settings range hysteresis [bar] [bar] | -0,9 |
| Setting options | Via display and buttons |
| Switching position display | LCD |
| Switching status indicator | Visual |
| Settings range threshold value [bar] | -0,999 |
| Operating pressure [bar] | 2 to 8 |
| Operating pressure for max. vacuum [bar] | 5,3 |
| max. vacuum [%] | 93 |
| Nominal operating pressure [bar] | 6 |
| Max. suction volume current against atmosphere [l/min] | 86,5 |
| Venting time for nominal operating pressure [s] | 0,2 |
| Operating voltage range DC [V] | 20.4 to 27.6 |
| Power-on time | 100 % |
| Inductive protection circuit | adjusted to MZ, MY, ME coils |
| Insulation voltage [V] | 50 |
| Empty run current [mA] | < 70 mA |
| Max. output current [mA] | 100 |
| Residual current [mA] | 0,1 |
| Control output | 2xPNP |
| Voltage drop [V] | <= 1,5 V |
| Coil characteristic value | 24 V DC: Low current phase 0.3 W, high current phase 2,55 W |
| Surge voltage strength [kV] | 0,8 |
| Overload resistant | Available |
| Degree of contamination | 3 |
| Permission | RCM mark<br>c UL us - Listed (OL) |
| KC-mark | KC-EMV |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation not possible |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Medium temperature [°C] | 0 to 50 |
| Relative humidity | 5 - 85 % |
| Noise level for nominal operating pressure [dB(A)] | 74 |
| Protection category | IP65 |
| Protection class | III |
| ambient temperature [°C] | 0 to 50 |
| Max. tightening torque | 0.8 Nm with female thread<br>2.5 Nm with throughway bore |
| Product weight [g] | 415 |
| Pressure measurement range [bar] | -1 |
| Accuracy FS [%FS] | 3,0 |
| Reproducibility shifting time FS [%] | 0,6 |
| Switching logic inputs | PNP (Positive switching) |
| Electrical connection | M12x1<br>5 pin<br>Plug |
| Fastening type | With throughway bores<br>With female thread<br>With Accessories |
| Pneumatic connection 1 | G1/4 |
| Pneumatic connection 3 | Silencer integrated |
| vacuum connection | QS-8 |
| Material information | LABS containing materials included<br>RoHs compliant |
| Seals material | NBR |
| Capture nozzle material | POM |
| Filter material | PA<br>Web<br>Sintered steel |
| Filter housing material | PA reinforced |
| Housing material | Aluminium die casting<br>PA reinforced |
| Regulation screw material | Steel |
| Silencer material | Aluminium wrought alloy<br>PU foam |
| Screws material | Steel |
| Window material | PA |
| Plug housing material | brass, nickel-plated |
| Plug contacts material | brass, Gold plated |
| Pins material | Steel |
| Jet nozzle material | Aluminium wrought alloy |
| Button field material | TPE-U |
| Screw connection material | brass, nickel-plated |
| Banjo bolt material | Aluminium wrought alloy |
| Elbow material | Stainless steel |
| Manufacturer Nr. | OVEM-20-H-B-PO-CE-N-2P |
|---|---|
| Manufacturer | Festo |
| EAN | 4052568258535 |
| Weight | 0.650000 |
| HS-Code | 84141089 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Article authenticity | Original product |
| Condition of article | New |
| Werkstoff | Aluminium |
| Betriebsdruck max [bar] | 8.000000 |
| Pneumatischer Anschluss | G1/4 |
| Schutzart | IP65 |
Write Your Own Review
Customers Who Bought This Item Also Bought
Related Products
Check items to add to the cart or
