Tool case for photovoltaics, 7 pieces for solar connectors MC4, 2.5 to 6.0 mm² - Knipex 97 91 04 V01

Anyone terminating solar cables on the roof and at the inverter needs stripper, crimping pliers and cable shears together in one place. Tool case 97 91 04 V01 combines 7 matched tools for MC4 solar connectors and covers conductor cross-sections from 2.5 to 6.0 mm².

Benefits

• Crimp System Pliers 97 43 200 A for interchangeable crimping dies, the crimping pressure is precisely set and calibrated at the factory.
• Crimping die 97 49 66 for MC4 solar connectors from 2.5 to 6.0 mm², together with locator 97 49 66 1 that holds the contact in the correct position.
• Precision Insulation Stripper 12 12 11 with adapted blades for 1.5 / 2.5 / 4.0 / 6.0 mm², covering the smaller stripping capacities.
• Cable shears 95 16 165 for copper cables up to Ø 15 mm, plus an Allen key as the assembly tool for changing the crimping dies.
• Set of mounting tools 97 49 66 2 for tightening the cable glands of MC4 solar connectors and for releasing the locking of MC4 housings.
• Foam insert with recesses for the tools as well as for 2 crimping dies and 2 locators, everything stays in place inside the impact-resistant plastic case.

Areas of use

Installation and service of photovoltaic systems, assembly of solar cables in the field, on the roof and at the inverter. Version V01 is designed for the smaller cross-sections from 2.5 to 6.0 mm², for 4.0 to 10.0 mm² there is case 97 91 04 V02.

Standards and conformity

The manufacturer does not state a tool standard for this case. According to the manufacturer the contents include substances of very high concern under REACH, the RoHS directive does not apply.