ESD safety low shoe C 6505 XP S3, CORDURA, fully metal-free - Atlas 13100

Metal detectors at the gate and an ESD requirement on the line usually rule each other out. The C 6505 XP resolves that, because neither the toe cap nor the penetration barrier contains metal and the person, shoe and floor resistance stays below 100 MOhm under the DIN EN 61340-5-1 measuring method.

What sets this model apart

• Safety class S3 with everything that belongs to it, closed heel cap, antistatic build, energy absorbing heel, water repellent upper, penetration resistant midsole and a cleated outsole. None of these parts is metal.
• C-TEC toe cap in high tech composite. It meets the 200 joules impact energy and 15 kN compression of EN ISO 20345:2012, shifts the centre of gravity towards the middle of the foot and forms no cold bridge over the toes.
• XP penetration resistance in aramid textile, metal free, full area and light. It supports the natural torsion of the foot that a steel midsole blocks.
• CORDURA upper, a nylon fabric with an open air texture. It repels water and dirt, is easy to care for, holds its shape over time and is lighter than leather of the same thickness.
• MPU INNOFLEX system in the outsole with INNOFLEX LINE, CLOUDZONE in the heel and DYNAMIC PLATES in the forefoot. The toe protector is carbon fibre reinforced and takes the abrasion of kneeling work.
• aktiv-X functional lining for permanent moisture regulation, standard width 10, slip resistance SRC, suitable for orthopaedic insoles under DGUV rule 112-191.

Applications

Electronics and semiconductor manufacturing with metal detection at the entrance, test and repair areas, plant assembly, maintenance, goods receipt and logistics. The first choice wherever S3 protection is required but no metal at all is permitted in the protective equipment.

Standards and conformity

• EN ISO 20345:2012, safety class S3, slip resistance SRC
• DIN EN 61340-5-1, person, shoe and floor resistance below 100 MOhm
• PPE Regulation (EU) 2016/425, risk category 2
• DGUV rule 112-191, suitable for orthopaedic insoles

Sizes

Available in EU sizes 36 to 49 in width 10. Sales unit is one pair.