ESD safety low shoe A 485 XP S3S SR, soft cowhide, width 10, black - Atlas 69100

Safety shoes get worn when they do not feel like safety shoes. The A 485 XP from the Atlas Sneaker Line is built for exactly that: soft full-grain cowhide, an MPU INNOFLEX outsole and a metal-free XP penetration-resistant insert instead of a steel midsole. None of that touches the protection class S3S SR to EN ISO 20345:2022, nor the ESD property to DIN EN 61340-5-1 with a resistance below 100 MOhm.

What the shoe does on the shop floor

• ESD shoe to DIN EN 61340-5-1. In the person-shoe-floor system the resistance stays below 100 MOhm, so the wearer's charge drains off in a controlled way instead of discharging into a component.
• Steel toe cap to EN ISO 20345, tested for 200 joules of impact energy and 15 kN of compression.
• Metal-free XP penetration-resistant insert made from aramid fabric. It covers the full sole area, weighs less than a steel midsole and leaves the foot its natural torsion.
• Soft full-grain cowhide upper, breathable and dimensionally stable.
• MPU REBOUND SYSTEM in the sole. It absorbs impact energy at the heel and returns it into the roll-off, which is what counts across eight hours of standing and walking.
• aktiv-X functional lining, moisture regulating, abrasion resistant and colourfast. It dries quickly and keeps the foot dry across a full shift.

Technical data

Areas of use

Electronics manufacturing and assembly, maintenance, warehousing and dispatch in EPA zones, and workshops where sharp objects end up on the floor.

Standards and conformity

Class S3S to EN ISO 20345:2022 means, in plain words: closed heel area, antistatic build, energy absorption in the heel, water-repellent upper, cleated outsole and penetration resistance. The trailing S marks the metal-free penetration-resistant insert, tested with the 3.0 mm nail. SR stands for slip resistance on ceramic with glycerine. For the ESD workplace, DIN EN 61340-5-1 is the governing standard. It measures the person-shoe-floor system, and the value has to stay below 100 MOhm. At the lower end the shoe standard caps the resistance at 0.1 MOhm so that the shoe still insulates during work up to 230 V. The antistatic range of the shoe standard itself runs from 0.1 MOhm to 1,000 MOhm.

The shoe is personal protective equipment of category II under PPE Regulation (EU) 2016/425. The model is approved for orthopaedic insoles to DGUV rule 112-191, the marking inside the shoe is what counts. The EU declaration of conformity is provided by the manufacturer ATLAS-Schuhfabrik in Dortmund.

Sizes

The article covers sizes 36 to 49, and each size can be ordered as its own variant. The sales unit is one pair.