ESD Safety Shoe C 1805 XP S1P, metal free, mesh, width 10, anthracite - Atlas 17500

Wherever detector gates, X-ray inspection or cold bridges inside the shoe matter, steel in the shoe is the problem. The C 1805 XP ESD works without any metal and keeps full S1P protection, meaning toe cap plus penetration resistance, together with dissipative ESD equipment.

Why metal free changes the picture

• XP penetration resistance in aramid. Instead of a steel midsole a high tech textile with aramid fibres is used. It is metal free, considerably lighter and follows the natural torsion of the foot, while covering the same additional requirement P.
• C-TEC cap instead of steel. The anatomically shaped composite toe cap shifts the centre of gravity towards the middle of the foot and helps prevent trips caused by imbalance. It behaves thermally neutral, so no cold bridge forms inside the shoe. EN ISO 20345 requires every toe cap to hold 200 joules impact energy and 15 kN compression.
• Charge drainage in the ESD area. The ESD equipment places the shoe inside the protection concept of DIN EN 61340-5-1. On a dissipative floor the wearer charge drains continuously and never reaches the assembly as a discharge.
• MPU INNOFLEX outsole system. The INNOFLEX LINE guides forces from heel to toe, the CLOUDZONE in the heel absorbs impact and the large MPU tread areas return energy into the next step. Slip resistance SRC.
• Climate for long shifts. The mesh upper is air permeable, the aktiv-X functional lining regulates moisture and the clima-stream concept balances temperature and humidity inside the shoe.
• S1P in plain words, plus insoles. Closed heel area, antistatic, energy absorbing heel and penetration resistant. The MPU REBOUND SYSTEM relieves pressure and the model is approved for orthopaedic insole fitting under DGUV rule 112-191.

Applications

Electronics manufacturing and test areas with detector gates, aerospace and security technology, cleanroom surroundings, assembly and maintenance, warehouse and order picking with small parts on the floor.

Standards and conformity

• EN ISO 20345, safety footwear for professional use, protection class S1P
• Composite toe cap, EN ISO 20345 requirement of 200 joules impact energy and 15 kN compression
• Penetration resistance P, metal free aramid textile
• Slip resistance SRC
• ESD equipment for workplaces to DIN EN 61340-5-1. EN ISO 20345 itself only verifies the antistatic range, the ESD proof belongs to the workplace concept.
• PPE Regulation (EU) 2016/425, risk category II
• Suitable for orthopaedic insole fitting under DGUV rule 112-191
• Manufacturer ATLAS-Schuhfabrik GmbH & Co. KG, Dortmund

Sizes and delivery

Available in EU sizes 36 to 49 in width 10. Supplied as one pair.