ESD safety low shoe ERGO-MED 737 XP S3, waterproof leather, width 12 - Atlas 15312

When standard width 10 pinches across the ball of the foot, width 12 from the ATLAS multi width system is the next step. More volume in the forefoot and instep, same length, same safety class. The ERGO-MED 737 XP pairs that with an upper in full grain Waterproof smooth leather of around 2 mm and a person, shoe and floor resistance below 100 MOhm under the DIN EN 61340-5-1 measuring method. The shoe stays sealed for hours and ESD compliant at the same time.

What sets this model apart

• Safety class S3 covers a closed heel cap, antistatic build, energy absorbing heel area, water repellent upper, penetration resistant midsole and a cleated outsole.
• Waterproof smooth leather of around 2 mm, full grain. It keeps the foot dry for several hours, stays breathable and dimensionally stable and survives a shift where oil, coolant or wet floors are involved.
• XP penetration resistance in aramid textile, metal free, full area and light. It allows the natural torsion of the foot that a steel midsole blocks. Added to that a steel toe cap to EN ISO 20345:2012.
• Outdoor sole technology with a lamella profile at the forefoot, GRIP-PLATES with a 4.5 mm deep coarse tread, the KRAFTLINIE force line for energy transfer while rolling off and a torsion element for lateral movement. On uneven ground the difference to a plain indoor sole is immediate.
• Built in width 12 from the ATLAS multi width system, with more volume than standard width 10. As an Ergo-Med series model with blueline marking, the shoe is released under DGUV rule 112-191 not only for insoles but also for certified orthopaedic modifications such as sole and heel raises.
• aktiv-X functional lining for permanent moisture regulation, 3D cushioning system of pressure relieving insole and MPU sole build, slip resistance SRC.

Technical data

Applications

Assembly and maintenance with ESD requirements, plant engineering, workshop, goods receipt and yard, field service between hall and open ground, companies with prescribed insole or orthopaedic provision. For purely dry, climate controlled production areas a lighter S1 or S1P model is the more economical choice.

Standards and conformity

• EN ISO 20345:2012, safety class S3, slip resistance SRC
• DIN EN 61340-5-1, person, shoe and floor resistance below 100 MOhm
• PPE Regulation (EU) 2016/425, risk category 2
• DGUV rule 112-191, suitable for insoles and for orthopaedic modifications, blueline marking inside the shoe

Sizes

Available in EU sizes 36 to 49, throughout in width 12. Sales unit is one pair.