ESD safety low shoe GX 245 S1P SRC for women, mesh upper, width 10 - Atlas 81300

The closed upper of the GX 245 keeps swarf and splashes out without the climate inside suffering, and the high tech mesh is what makes that work. In electronics manufacturing a second figure counts as well: person, shoe and floor resistance stays below 100 MOhm to DIN EN 61340-5-1. The wearer's charge drains in a controlled way instead of discharging into the next component. Both sit in a shoe built on a dedicated women's last rather than a downscaled men's one.

What sets this model apart

• Safety class S1P to EN ISO 20345: closed heel section, antistatic build, energy absorbing heel area, toe cap tested to 200 joules of impact energy, plus the penetration barrier against nails and swarf.
• ESD dissipation to DIN EN 61340-5-1 with a resistance below 100 MOhm. The antistatic band of the shoe standard runs from 10 to the power of 5 ohms (100 kOhm) to 10 to the power of 9 ohms (1000 MOhm), and the ESD shoe stays deliberately below that.
• women fit last: the models were developed around the anatomy of the female foot, with a comfortable soft bedding instead of a merely downscaled men's shape. Over eight hours of standing that is the difference you feel most.
• SPORTY LIGHT outsole based on the MPU Light sole technology. The lamella profile of the GRIP-SEGMENTS delivers slip resistance SRC, the DYNAMIC LINE at the forefoot transfers forward energy and the CLOUDZONE in the heel catches the impact on landing.
• High tech mesh upper, permanently breathable and flexible, combined with the aktiv-X functional lining and the clima-stream concept. Atlas puts the comfort temperature inside the shoe at 32 degrees Celsius, and a deviation of just 1 to 2 degrees is already felt as hot or cold feet.
• Replaceable insole with heel cushioning and the MPU REBOUND SYSTEM. Under DGUV rule 112-191 the model is released for orthopaedic insole provision, the marking sits inside the shoe.

Technical data

Applications

Electronics manufacturing and assembly with an EPA to DIN EN 61340-5-1, test and measuring stations, laboratory and cleanroom preparation, light assembly, order picking and service work inside the ESD area. Anyone who mainly needs air around the foot in climate controlled areas is better served by the open sandal GX 265.

Standards and conformity

• EN ISO 20345, marking S1P SRC
• DIN EN 61340-5-1, person, shoe and floor resistance below 100 MOhm
• PPE Regulation (EU) 2016/425, risk category 2
• DGUV rule 112-191, suitable for orthopaedic insoles

Sizes

Available in EU sizes 35 to 43, throughout in width 10 on the women fit last. Sales unit is one pair.