ESD safety low shoe CL 20 S2 SRC, width 10, CLEANLINE white, unisex - Atlas 87500

Where white workwear is mandatory and sensitive assemblies cross the bench at the same time, the shoe has to do both jobs. The CL 20 keeps the resistance below 100 MOhm person plus shoe plus floor to DIN EN 61340-5-1 and meets class S2 to EN ISO 20345 as a low shoe.

It is built on the Atlas standard width 10, which is already cut wide and close to the natural foot. The CLEANLINE upper is water-repellent, bacteria-inhibiting and odour-inhibiting and stays tear-resistant despite its low weight.

Key benefits

• Dissipation to DIN EN 61340-5-1 with a resistance below 100 MOhm measured person plus shoe plus floor, so the wearer charge never reaches the component
• Protection class S2 SRC to EN ISO 20345 with a steel toe cap rated for 200 joules of impact and 15 kN of compression
• White CLEANLINE upper, water-repellent, bacteria-inhibiting and odour-inhibiting, light yet tear-resistant
• MPU INNOFLEX System sole concept that guides the load along one continuous line from heel to toe
• MPU REBOUND SYSTEM combining a pressure-relieving insole with a responsive MPU outsole for eight hours on your feet
• aktiv-X functional lining, moisture-regulating, skin-friendly and abrasion-resistant
• Approved for orthopaedic insoles to DGUV rule 112-191

Areas of use

The shoe belongs where ESD protection and hygiene meet: board and assembly production, test and measuring stations, cleanroom ante-areas, laboratories as well as picking and packing in medical technology. It is not made for wet outdoor work, where it lacks penetration resistance and a coarse tread.

Standards and conformity

The classification EN ISO 20345 S2 SRC covers everything S1 requires, namely a closed heel area, antistatic construction, 20 joules of energy absorption in the heel and a fuel-resistant outsole, and adds a water-repellent upper that resists water penetration and absorption. SRC covers the slip test on ceramic tile with detergent and on steel flooring with glycerine.

For its ESD models Atlas guarantees a resistance below 100 MOhm, that is below 10^8 Ohm, measured person plus shoe plus floor to DIN EN 61340-5-1. The footwear standard EN ISO 20345 contains no ESD test of its own and only requires antistatic shoes to stay between 10^5 and 10^9 Ohm. Anyone running an EPA to DIN EN 61340-5-1 therefore needs the tighter ESD figure rather than the antistatic range alone.

To EN ISO 20345 the toe cap withstands an impact of 200 joules and a static compression of 15 kN. The shoe is category II personal protective equipment under Regulation (EU) 2016/425 and Atlas publishes the EU declaration of conformity for the model.

Sizes

The model is available in EU sizes 36 to 49. Pick the size you need directly in the item selection.