ErgoSpin angle nutrunner ESA065G-G, 13 to 65 Nm - Bosch Rexroth 0608841229

With a working range of 13 to 65 Nm, the ErgoSpin ESA065G-G angle nutrunner handles joints in the upper torque range of the series. The angle design takes the reaction torque through the handle and reaches fastening points at right angles to the working direction.

The nutrunner is operated on a Rexroth tightening controller, either the CS351 compact tightening system or Tightening System 350. Tightening programs and limits are set there.

Benefits

• Working range 13 to 65 Nm: one tool for all joints within this torque window
• Angle design: output at right angles to the handle, for fastening points that are hard to reach from the front
• Runs on the CS351 compact tightening system or in Tightening System 350, with parameters set in the controller
• Connected via the S-... nutrunner cables for ErgoSpin handheld tools

Specifications

Applications

• Joints in the upper torque range up to 65 Nm
• Assembly of structural components at manual workstations
• Fastening points that can only be reached from the side

System compatibility

• CS351 compact tightening system: controller and power unit in one housing for one nutrunner
• Rexroth Tightening System 350 with power unit and control unit
• S-... nutrunner cables for ErgoSpin handheld tools, length and connector shape to suit the workstation