Two-Point Resistance Probe for Small Samples per ANSI/ESD STM11.13, with BNC Adapter - Desco 19297

Component carriers, clips, tool handles or tray dividers are too small for 2.27 kg electrodes. The Desco 19297 Two-Point Resistance Probe measures exactly there: two spring-loaded pins with conductive rubber electrodes sit on the sample, and the minimum measurement area is just 19 x 5 mm. It connects to the meter test leads with the included BNC to banana jack adapter.

Key benefits

• Measures small samples from an area of 19 x 5 mm and a depth of 11 mm.
• Gold-plated, spring-loaded pins with conductive rubber electrodes keep contact consistent on non-flat surfaces.
• Defined geometry: electrodes 3.2 mm diameter, 6.4 mm between centres.
• Testing per ANSI/ESD STM11.13, replacement pins available as item 19299.

Applications

Qualification and incoming inspection of small ESD items and packaging, measuring sections of larger parts, testing tools and fixtures. Place the sample on an insulative surface for the measurement.

Standards

Meets the requirements of ANSI/ESD STM11.13 for two-point resistance measurement.