Large Conductive L-Shaped PCB Rack, 25 Slots, 355 x 268 x 128 mm - Desco 237200

Populated boards need a safe place to wait between process steps, without touching each other or picking up charge. The large L-shaped Desco 237200 PCB rack holds 25 assemblies upright in 3 mm slots and drains charges through its conductive polypropylene, with a volume resistance of 1 x 10³ to below 1 x 10⁵ ohms.

Key benefits

• 25 slots, 3 mm wide: room for a full batch, with boards kept apart.
• Conductive material: volume resistance 1 x 10³ to below 1 x 10⁵ ohms, tested per IEC 61340-2-3.
• L-shaped design: stores boards roughly 25 % longer than the depth of the rack base.
• Small footprint: 355 x 268 x 128 mm and only 0.53 kg.
• Rated up to 75 °C: recommended maximum operating temperature.

Applications

Buffer storage of populated PCBs at the placement line, in goods-in, test and rework. The rack protects best as part of a fully grounded ESD workstation. For smaller boards, the small version 237195 with 2 mm slots is available.

Standards

The resistance range meets the requirements for ESD packaging under EN 61340-5-1 and IEC 61340-5-3, measured per IEC 61340-2-3.