Conductive ESD Brush, Flat, Semi-Firm, 13 mm Bristle Width, Conductive Handle - Desco 35694

Solder debris, dust and foreign objects have to come off PCBs without brushing generating charges. This Menda ESD brush has bristles of conductive yarn and horse hair and a conductive carbon loaded polypropylene handle. With a resistance RTT of 1 x 10³ to < 1 x 10⁵ ohms it drains charges through the grounded hand. The narrow, flat shape with a 13 mm wide bristle area reaches solder joints precisely.

Key benefits

• Conductive: RTT 1 x 10³ to < 1 x 10⁵ ohms, tested per modified ANSI/ESD S4.1, charges drain through the grounded operator.
• Semi-firm bristles of conductive yarn and horse hair, mainly for electronics and removing solder and rework debris.
• Conductive carbon loaded polypropylene handle whose ESD properties, unlike wooden handles, do not depend on humidity.
• The conductive yarn prevents the natural hair from charging even in low humidity.

Applications

Removing solder debris, flux residue and rework dirt from PCBs, also together with solvents. For soldering, rework and assembly stations inside the EPA.

Standards

Resistance measured per modified ANSI/ESD S4.1. The conductive handle fulfils the ANSI/ESD S20.20 requirement to ground all conductors at the ESD workstation when the brush is used by grounded personnel. Natural hair may shed.