Emit Mini Zero Volt Ionizer 2, compact benchtop ionizer with stainless steel housing, ±5 V offset - Desco 50642

Insulators and isolated conductors cannot be drained through a wrist strap or mat. The Emit Mini Zero Volt Ionizer 2 neutralizes their charge with ionized air across a coverage area of about 15 x 60 cm, with discharge times below 3 seconds at 30 cm and an offset voltage of ±5 V.

Key benefits

• Self-balancing: an internal sensor grill continuously adjusts the output, keeping offset voltage at ±5 V, well inside the ±50 V limit of ANSI/ESD S20.20.
• Fits confined spaces: 14 cm high, 9 cm wide, 4 cm deep including the multi-mount stand.
• Two-speed fan from 33 to 51 CFM, with the low setting for small parts that would move in stronger airflow.
• Broad coverage from widely spaced steady-state DC emitters that reduce ion recombination.
• Solid tungsten emitter points stay sharp and resist oxidation.
• Status LED and audible alarm signal circuit failure or dirty emitters.

Applications

Charge neutralization at ESD workstations, inside environmental chambers and in automated machinery where there is no room for a larger unit. The stainless steel housing and shielded bearings suit clean rooms and contamination-sensitive areas. Ionization supplements grounding, it does not replace it.

Standards

Offset voltage and discharge time exceed the requirements of ANSI/ESD S20.20, measured per ESD TR53.