Chargebuster Overhead Ionizer with 2 Fans and LED Light, 61 x 122 cm, 220 VAC - Desco 50602

Board laminate, device packages and plastic parts cannot be grounded and carry their charge right up to the component. The Desco 50602 Chargebuster overhead ionizer hangs above the workstation and neutralizes those charges across a 61 x 122 cm area in less than 3 seconds, without taking up any worksurface. A 700 lumen LED panel adds light to the work area.

Key benefits

• Fast neutralization: discharge time below 3 s at 46 cm, offset voltage ±10 V.
• Even coverage: two fans with steady-state DC ionization for 61 x 122 cm.
• More light on the job: built-in 700 lumen cool white LED panel with its own switch.
• Consistent output: three fan speeds with the same ionization performance, suitable for calibration and test stations that need low airflow.
• Self-monitoring: auto-feedback keeps performance optimized, audible alarm and tri-color LED, automatic shutdown if supply voltage drops.
• Easy maintenance: pure tungsten emitter pins, field replaceable, sealed plenum keeps contamination away from the workstation.

Applications

Electronics assembly, manual workstations, test, calibration and repair stations in the EPA, wherever process-essential insulators cannot be removed. Ionization supplements the grounding of people and worksurfaces, it does not replace it.

Standards

Discharge time and offset voltage meet the ionization limits of EN 61340-5-1 and ANSI/ESD S20.20 (offset below ±35 V), tested per ANSI/ESD STM3.1. Performance should be verified periodically as part of the ESD control program.