Jewel ESD Coiled Cord, Sapphire, 1.8 m, 10 mm Snap to Banana Plug, 1 Megohm - Desco 60261

The coiled cord links the wristband to the ground point and flexes with every arm movement. The Jewel coiled cord is built for this: its moulded strain relief exceeds 50,000,000 cycles in the ANSI/ESD S1.1 bending life test, where 16,000 are required. A 1 megohm resistor at the wrist end protects the operator from accidental contact with line voltage.

Key benefits

• Over 50 million flex cycles per ANSI/ESD S1.1 prevent the intermittent failures common with basic cords.
• Rapid-retraction polyurethane coil reduces tangling and dragging across the worksurface.
• Spring-loaded 10 mm stainless steel snap socket for constant contact with the wristband.
• Banana plug with supported spring contour gives high retention in standard jacks.
• Tensile strength above 13.6 kg at each end, date code for traceability.

Applications

For personnel grounding at ESD workstations, together with a wristband with 10 mm stud such as the Jewel wristband Desco 60001. The banana plug fits ground points, mat grounds and monitors with banana jacks.

Standards

Designed to meet the coiled cord requirements of IEC 61340-5-1 (EN 61340-5-1) and tested per its clause A.1. The 1 megohm resistor fulfils clause 5.1.1 of EN 61340-5-2.