ERSADUR Lötspitze für i-Tool, gerade, meißelförmig, 2,4 mm - Ersa 0102CDLF24
-
This Item:
€6.63
-
Ersadur Desoldering Tip Set, 90° Angle, 12.5 mm, for PLCC 28 - Ersa 0452QDLF125
€52.06
-
Hot air nozzle, bent, 1.7 mm for i-Tool AIR S - Ersa 0472DR
€13.92
The 0102CDLF24 is the wide working tip on the i-Tool. A 2,4 mm chisel face gives off noticeably more heat than 2,0 mm and is the right choice when copper areas, ground connections, terminals or heavy through hole leads pull the heat away. For densely spaced leads below roughly 2,54 mm pitch it is too wide, and there the 2,0 mm 0102CDLF20 takes over.
Technical data
| Part number | Ersa 0102CDLF24 |
| Tip series | 102 |
| Shape | chisel, straight |
| Tip width | 2,4 mm |
| Overall length | 30,5 mm |
| Shank outside | 5,2 mm |
| Shank inside | 3,5 mm |
| Plating | ERSADUR-LF long life tip |
| RoHS compliant | yes |
Fits
The i-Tool 0100CDJ iron and therefore the i-CON, i-CON1 and i-CON1V, i-CON nano, i-CON pico and pico Plus16, i-CON2 and i-CON2V stations as well as the Vario 4 versions equipped with an i-Tool.
Iron plated long life tip with an additional chromium layer, released for lead free and leaded solder. A wear part that gets replaced regularly in continuous use.
| Manufacturer Nr. | 0102CDLF24 |
|---|---|
| Manufacturer | Ersa |
| GPSR manufacturer information | Bräunlich GmbH Am Heideberg 26, DE 06886 Lutherstadt Wittenberg, www.braeunlich-gmbh.com |
| Article authenticity | Original product |
| Condition of article | New |
| Position sensing | No |










