Ersadur Lötspitze i-Tool MK2 & Trace, meißelförmig asymmetrisch 2,4 mm - Ersa 0142CDLF24A

Between tall components, along connector combs and at board edges the iron can rarely be set down vertically, and that is exactly where a straight chisel loses contact area. The asymmetric grind on this 2.4 mm face compensates for the approach angle, so heat still transfers across the full flat even when the iron is tilted.

Features

• Asymmetrically ground chisel face, 2.4 mm wide, made for angled iron guidance.
• Larger wetted area than a pencil point, which holds more solder at the working face.
• ERSADUR long-life tip, galvanically iron plated and dimensionally stable at high cycle rates.
• Chrome layer on the shank against corrosion and oxidation.
• Series 142 shank, 7.70 mm outside and 5.30 mm inside, hot tip change via the bayonet fitting.
• RoHS compliant.

Application

Rework and repair on populated assemblies, joints close to tall parts, connector terminals and cable lugs. Where the iron can stand vertically, the straight version 0142CDLF24 is the simpler choice.

Compatibility

For the i-Tool MK2 and the i-Tool TRACE and i-Con TRACE irons only. Series 142 tips do not fit the first generation i-Tool.