ESD cabinet housing 36x36E, 717x725x1000 mm, clear height 900 mm, KEY Lock without cylinder - Lista 93.313

If you want to build an ESD drawer cabinet to your own requirements, start with this housing: 717 x 725 x 1000 mm outside and 900 mm of clear height for the drawers. 900 mm of clear height gives a lot of storage space on a small footprint. It locks with the KEY Lock, Lista's standard lock with an interchangeable cylinder. The cylinder is ordered separately, so you can match it to an existing key system.

Benefits

• Dissipative surface: all painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• KEY Lock: mechanical key lock with interchangeable cylinder, the cylinder is not included.
• Free drawer layout: 900 mm clear height in the 36 x 36 E grid, drawers are selected separately to suit your needs.
• Can be made mobile: with a castor base pair and an edge rim with push bar the cabinet becomes mobile.

Colours

Select the ESD colour when you order from these options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The housing is used in EPA areas of electronics production and at EMS providers, at test and repair stations, in labs and component stores. The dissipative effect requires the cabinet to be properly earthed. Matching items in the 36 x 36 E format include an ESD resin cover plate as a work and storage surface, a grooved mat as a non-slip top, a three-sided edge rim, a four-sided edge rim with push bar and a castor base pair with rubber castors. According to Lista, mobile drawer cabinets must have a push bar and a single-drawer interlock for safety reasons.

Notes

Drawers are not included and must be ordered separately. The lock cylinder for the KEY Lock is not included. Follow Lista's assembly instructions and loading guidelines when loading the drawers. The load capacity applies to an evenly distributed load.