ESD cabinet housing 18x27E, 411x572x533 mm, inner height 450 mm, KEY Lock - Lista 93.225

Space under a work surface is limited: at 533 mm high, this housing can be planned there as a lockable drawer pedestal. You distribute the inner height of 450 mm freely across drawers in the 18 x 27 E grid, while the narrow housing measures 411 x 572 mm outside. Drawers are not included and are ordered separately.

Benefits

• Dissipative surface: All painted parts carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• KEY Lock: The Lista standard lock with interchangeable cylinder is opened and locked manually with a key, with no battery or electronics.
• Freely configurable: 450 mm inner height in the 18 x 27 E grid, you put together the drawers and their front heights as needed.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

Typical places are assembly, test and repair stations in EPA areas, at EMS providers and in the lab. The dissipative effect requires the cabinet to be properly grounded. Matching items in the 18 x 27 E format include an ESD resin cover plate as a top surface, a ribbed mat for the top, a three-sided roll-off edge, a four-sided roll-off edge with push bar and pairs of ESD castor rails that make the cabinet mobile.

Notes

For loading the drawers, follow the Lista assembly instructions and loading guidelines. Stated load capacities apply to evenly distributed loads.