ESD spray paint AstraStat type S, 2K PU, 400 ml, RAL 7035 light grey - Statech Systems EP1101006

ESD Spray Paint AstraStat Type S 2K PU 400 ml, RAL 7035 light grey - Statech Systems

Images are examples, some edited with AI. The technical data are authoritative. AI notice

ESD Spray Paint AstraStat Type S 2K PU 400 ml, RAL 7035 light grey - Statech Systems

Name: ESD Spray Paint AstraStat Type S 2K PU 400 ml, RAL 7035 light grey - Statech Systems
Brand: Statech Systems
SKU: 4S-AS-ESD-S7035
Price: 81.2 EUR
Availability: InStock

Statech Systems ✓ Original product Brand new Made in Switzerland

Permanently dissipative 2K PUR single-layer paint in light grey (RAL 7035), 400 ml aerosol can with the hardener built in. One can covers 1.5 to 2 m² and keeps surface resistance permanently below 3.5 x 10⁷ ohm, measured to IEC 61340-2-3. Light grey matches most workshop furniture and shows contamination early.

Net

€81.20

excl. VAT

Item 4S-AS-ESD-S7035

Manufacturer no. 4S-AS-ESD-S7035

Question about this item

Datasheet (PDF) 4 documents, all under Downloads

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

Insulating shelves, bins and table tops can be made dissipative with AstraStat type S without replacing them. The two-component polyurethane paint carries its hardener inside the can, stays workable for about 5 hours after activation and dries to a satin, abrasion-resistant film.

Benefits

Surface resistance permanently below 3.5 x 10⁷ ohm to IEC 61340-2-3, independent of humidity and temperature
Hardener sits inside the can, no mixing and no leftover container
Wide-jet spray head atomises finely and lays down an even film
Chemical and abrasion resistant, also on laminate, wood, PVC and GRP
Ready for assembly after 2 hours, so the workstation returns to service the same day

Applications

For storage racks, trolleys, table surfaces, drawer units, workpiece carriers and containers in the EPA. Steel and aluminium can be coated as well when a soft discharge is wanted instead of a hard ground path. Light grey matches most workshop furniture and shows contamination early.

How to apply

Prepare the substrate clean, dry and free of grease
Shake the can for about 3 minutes, spray from 20 to 30 cm
On plastics such as ABS, PA, PC, POM, PP/EPDM, PPO, PUR and PVC apply the 4S-HP-S primer first
During breaks turn the can upside down and spray the nozzle clear

Standards and notes

Surface resistance measured to IEC 61340-2-3, use inside an EPA to IEC 61340-5-1. For professional use only. The can is pressurised, keep it out of sunlight and above 50 °C. Empty cans do not belong in household waste.

Technical data

Weight	0.5 kg
Manufacturer	Statech Systems
Manufacturer Nr.	4S-AS-ESD-S7035
HS-Code	32082090
GPSR manufacturer information	A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment
Condition of article	New
Article authenticity	Original product
Country of Manufacture	Switzerland
Sales unit	1 Spraydose 400 ml
Colour	Light Grey
Farbe	RAL 7035 lichtgrau
ESD version	ESD (antistatic)
ESD equipment	ESD-Lacke
ESD-Eigenschaft	dissipative
Certification	DIN EN 61340-2-3, IEC 61340-5-1
Volumen (l)	0.4

Type: 2K PUR single-layer paint, acrylic resin with aliphatic polyisocyanate
Shade: RAL 7035 light grey
Gloss level: satin
Content: 400 ml aerosol can, hardener 4S-AS-HRT inside
Surface resistance: below 3.5 x 10⁷ ohm (IEC 61340-2-3)
Coverage: 1.5 to 2 m² per can
Pot life after activation: approx. 5 hours at 20 °C
Drying: dust dry after 5 to 10 minutes, touch dry after 20 to 30 minutes, ready for assembly after 2 hours
Application from +10 °C, relative humidity up to 80 percent
Shelf life: 12 months at 23 °C