ESD Spray Coating AstraStat Type B 2K PU 5.6 kg Set, RAL 7035 light grey - Statech Systems
-
This Item:
€749.00
-
ESD Adhesion Primer HP-S for AstraStat Type S, 1K, 400 ml - Statech Systems
€44.30
-
ESD Spray Paint AstraStat Type S 2K PU 400 ml, RAL 1023 traffic yellow - Statech Systems
€81.20
An aerosol is not enough when a whole installation has to become dissipative. AstraStat type B is rolled or sprayed and coats laboratory benches, steel cabinets, trolleys and GRP parts in one pass. The set of 4.8 kg base paint and 0.8 kg hardener covers roughly 67 m² at 30 micron dry film thickness.
Benefits
- Surface resistance below 3.5 x 10⁷ ohm to IEC 61340-2-3, permanent and independent of humidity and temperature
- Cleanroom suitable to class ISO 5, which also covers assembly lines in electronics manufacturing
- High abrasion resistance and good chemical resistance, weatherproof outdoors as well
- Adheres to difficult substrates such as GRP, laminate and coated metal
- Single-layer and top coat in one, no separate build-up needed
Technical data
- Type: 2K PUR ESD conductive paint, matt, polyisocyanate-crosslinking acrylic resin
- Shade: RAL 7035 light grey
- Supply form: 4.8 kg base paint and 0.8 kg hardener 4S-AS-HRT
- Mixing ratio: 6:1 by weight
- Surface resistance: below 3.5 x 10⁷ ohm (IEC 61340-2-3)
- Coverage: 81 g/m², around 12 m² per kg at 30 micron dry film
- Pot life: approx. 5 hours at 23 °C
- Drying at 20 °C: dust dry after 30 minutes, touch dry after 4 hours
- Supply viscosity: 200 to 250 mPas, mixed density 1.3 g/cm³
- Solids content: 69 percent base paint, 70 percent mixed
- Application from +10 °C, shelf life 6 months at 23 °C
Applications
Electronics manufacturing and assembly, chemical plants, pyrotechnics and explosion-protected areas. Typical objects are laboratory benches, chairs, trolleys, steel cabinets, plastic panels and containers. Light grey is the standard shade for industrial furniture and steel cabinets.
How to apply
- Stir the base paint and mix it with the hardener about a quarter of an hour before use
- Roller: up to 8 percent thinner 4S-VA or at supply viscosity
- Spray: approx. 20 percent thinner 4S-VA, spray viscosity 30 seconds DIN-4
- Clean equipment immediately after use with 4S-VA thinner
Standards and notes
Measuring method to IEC 61340-2-3, use inside an EPA to IEC 61340-5-1. Slight deviations from the RAL shade come from the conductive pigments. Transparent, white, luminous and signal colours cannot be produced. See the safety data sheet for safety information.
| Weight | 9.000000 |
|---|---|
| Manufacturer | Statech Systems |
| Manufacturer Nr. | 4S-AS-ESD-B |
| HS-Code | 32082090 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Switzerland |
| Sales unit | Set 5,6 kg (4,8 kg Stammlack + 0,8 kg Härter) |
| Colour | Light Grey |
| Farbe | RAL 7035 lichtgrau |
| ESD version | ESD (antistatic) |
| ESD equipment | ESD-Lacke |
| ESD-Eigenschaft | dissipative |
| Certification | DIN EN 61340-2-3, IEC 61340-5-1 |
