ESD Spray Paint AstraStat Type S 2K PU 400 ml, RAL 1023 traffic yellow - Statech Systems
-
This Item:
€81.20
-
ESD Adhesion Primer HP-S for AstraStat Type S, 1K, 400 ml - Statech Systems
€44.30
-
ESD Spray Paint AstraStat Type S 2K PU 400 ml, RAL 7035 light grey - Statech Systems
€81.20
Insulating shelves, bins and table tops can be made dissipative with AstraStat type S without replacing them. The two-component polyurethane paint carries its hardener inside the can, stays workable for about 5 hours after activation and dries to a satin, abrasion-resistant film.
Benefits
- Surface resistance permanently below 3.5 x 10⁷ ohm to IEC 61340-2-3, independent of humidity and temperature
- Hardener sits inside the can, no mixing and no leftover container
- Wide-jet spray head atomises finely and lays down an even film
- Chemical and abrasion resistant, also on laminate, wood, PVC and GRP
- Ready for assembly after 2 hours, so the workstation returns to service the same day
Technical data
- Type: 2K PUR single-layer paint, acrylic resin with aliphatic polyisocyanate
- Shade: RAL 1023 traffic yellow
- Gloss level: satin
- Content: 400 ml aerosol can, hardener 4S-AS-HRT inside
- Surface resistance: below 3.5 x 10⁷ ohm (IEC 61340-2-3)
- Coverage: 1.5 to 2 m² per can
- Pot life after activation: approx. 5 hours at 20 °C
- Drying: dust dry after 5 to 10 minutes, touch dry after 20 to 30 minutes, ready for assembly after 2 hours
- Application from +10 °C, relative humidity up to 80 percent
- Shelf life: 12 months at 23 °C
Applications
For storage racks, trolleys, table surfaces, drawer units, workpiece carriers and containers in the EPA. Steel and aluminium can be coated as well when a soft discharge is wanted instead of a hard ground path. Traffic yellow works as a signal colour for EPA boundaries, staging areas and hazard zones.
How to apply
- Prepare the substrate clean, dry and free of grease
- Shake the can for about 3 minutes, spray from 20 to 30 cm
- On plastics such as ABS, PA, PC, POM, PP/EPDM, PPO, PUR and PVC apply the 4S-HP-S primer first
- During breaks turn the can upside down and spray the nozzle clear
Standards and notes
Surface resistance measured to IEC 61340-2-3, use inside an EPA to IEC 61340-5-1. For professional use only. The can is pressurised, keep it out of sunlight and above 50 °C. Empty cans do not belong in household waste.
| Weight | 0.500000 |
|---|---|
| Manufacturer | Statech Systems |
| Manufacturer Nr. | 4S-AS-ESD-S1023 |
| HS-Code | 32082090 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Switzerland |
| Sales unit | 1 Spraydose 400 ml |
| Colour | Yellow |
| Farbe | RAL 1023 verkehrsgelb |
| ESD version | ESD (antistatic) |
| ESD equipment | ESD-Lacke |
| ESD-Eigenschaft | dissipative |
| Certification | DIN EN 61340-2-3, IEC 61340-5-1 |
| Volumen (l) | 0.400000 |









