ESD support column 1400 mm, profile 30x60 mm, for mounting on workbench tops, centre position - Lista 93.396

For multi-level superstructures over wide workbenches, this 1400 mm centre ESD support column carries the shelves of two adjacent bays. Several levels for components, instruments and documents can be hung above the top without extra uprights at the edges.

Benefits

• Dissipative surface: The painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• Hang without screws: the steel profile is perforated on four sides in a 50 mm pitch, so add-on parts hang in and move largely without tools.
• 100 kg capacity: on beech or multiplex tops, 50 kg on Universal, Eterlux, resin and ABS tops.
• Supplied complete: fixing material for screwing onto the top is included.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The column belongs to Lista's universal superstructures and carries adjustable shelves, swivel shelves and other add-on parts above ESD workbenches in electronics production, at test and repair stations and in the lab. It is only suitable for workbench tops made of beech, multiplex, Universal, Eterlux, resin and ABS with a thickness of at least 40 mm. The dissipative effect depends on the setup being properly earthed.

Notes

When the full load capacity is used, a support bracket is mandatory. For mounting on a 28 or 30 mm worktop of an electrically height-adjustable table (Lista Quattro, Duo, Solo), a counter holder or counter plate is required. Observe Lista's planning note on support column load capacity.