ESD support column for mounting on workbench tops, height 350 mm, profile 30x60 mm, position right - Lista 93.392

As the right column for a low structure, this 350 mm column is screwed directly onto the workbench top at the right end of the top, with no frame needed. The full 350 mm height is usable for components hung into it. Fixing material is included, the holes in the top are drilled on site.

Benefits

• Dissipative surface: All painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• 50 mm hole pitch: steel profile perforated on four sides, components hang in largely without screws.
• 100 kg load capacity: according to Lista, 50 kg on Universal, Eterlux, resin and ABS tops.

Colours

Select the ESD colour when you order:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The column adds a structure with energy back panel, adjustable shelves, cantilever arms and lighting to existing ESD workbenches in production, testing and repair. Suitable tops are beech, multiplex, Universal, Eterlux, resin and ABS with at least 40 mm thickness. The dissipative effect depends on the workstation system being properly earthed.

Notes

The outer support columns protrude 15 mm beyond the top as standard. For a flush finish, tops with 30 mm extra length can be ordered, for example 1530 or 2030 mm. When mounting on a 28 or 30 mm top of an electrically height-adjustable table (Lista Quattro, Duo, Solo), one of the three counter holders or counter plates is required. Observe the Lista planning notes on support column load capacity.