Lötspitze verlängert, Sonderform mit Bohrung, 3,0 x 1,5 mm für Lötroboter-Tools 9018M, 9018BMT - Quick QU911G-30PCV-07

Pin terminals sunk into a housing are hard to reach with a plain chisel tip, and they only get heat from one side. The QU911G-30PCV-07 is built in an extended form and carries a bore in its end face, so the round lead sits inside it around its circumference, with a working size of 3.0 x 1.5 mm.

What the special shape delivers

• Bore in the end face, round leads such as pins or tinned strands make contact around the circumference rather than on one edge only.
• Extended body, which keeps recessed joints and joints boxed in by taller parts reachable.
• Working size of 3.0 x 1.5 mm, and at 1.5 mm of material thickness far more mass than the 0.8 mm chisel tips of the series.
• Straight design, matched to the fixed axis position in the robot and a repeatable approach dimension.
• RoHS compliant and usable without restriction in lead free series processes.

Technical data

Application and compatibility

For the 9018M and 9018BMT robot soldering tools and therefore for the QUICK ET9181 SEMI-AUTO with wire feeder, the 9594FYA and 9584EYA with two tables, the ET9494E and ET9494F-A and further models of the range. Where the joint is open and flat, the extended chisel QU911G-40D-07 at 4.0 x 1.5 mm or the short QU911G-30D-07 at 3.0 x 0.8 mm will do. Scope of delivery: one soldering tip.