Kartuschen-Lötspitze TS1, messerförmig 3,0 mm (SS1-SK) - Quick SS1-SK

A solder bridge between two pins does not clear with more heat, it clears when the surplus solder is carried away. The knife edge of this SS1 tip runs straight over 3.0 mm and picks the solder up as it is drawn along the row instead of spreading it between the leads.

Features

• Knife shape with a straight 3.0 mm edge, the working face is on the flank and not at the point.
• Long contact length, so a whole row of leads can be treated in one movement.
• Suited to drawing surplus solder off and to laying it down in a controlled line along an edge.
• Cartridge design with the heater close to the tip, so temperature does not collapse during a longer pass.
• RoHS compliant according to the manufacturer.

Application, scope of delivery and compatibility

For clearing solder bridges, drag soldering QFP and SOIC rows and working on multi-way connectors, on the QUICK TS1 cordless iron rated 10 W over 100 to 420 °C. Scope of delivery, one soldering tip. If a bevelled face holding a solder reservoir is wanted instead of a flank, the SS1-3C at 45 degrees is the matching shape in the same series.