Soldering tip conical 1 mm length 16.7 mm STTC series - Metcal STTC-007

Where ground planes or larger pads draw off heat, a micro tip no longer copes. The STTC-007 is a conical soldering cartridge with 1 mm tip diameter and 16.7 mm tip length, rated at a 357 °C working temperature. Heating is regulated by the Curie point of the alloy inside the cartridge body, so the 357 °C working temperature is fixed and needs no calibration.

Benefits

• Conical 1 mm tip diameter for stronger heat transfer than fine tips
• Tip length of 16.7 mm for deep assemblies and access past tall neighbouring parts
• Fixed 357 °C working temperature with no readjustment under load changes
• Tool free change on the MX-H1-AVA and MX-RM3E hand pieces
• Usable on MX-500, MX-5000 and MX-5200

Technical data

Applications

For through hole parts, connectors, cable joints and larger SMD pads. The long body helps at recessed joints inside housings and on mechanically built up assemblies.

Compatibility and scope of delivery

The cartridge runs on the MX-H1-AVA and MX-RM3E hand pieces and therefore on the Metcal MX-500, MX-5000 and MX-5200 systems. It is exchanged without tools while the unit stays powered. Delivery covers one single soldering cartridge without hand piece and without power unit.