Filter mats M5-02 and F7-02 240 x 240 x 20 mm pack of 10 for series 160/200 - ULT 4-00241

Leaving a filter mat in place too long is paid for by the main filter behind it. This pack of ten ULT filter mats in classes M5-02 and F7-02 puts the replacement stock right at the bench for solder fume extraction of the 160.1 and 200.1 series. The M5/F7 mat combination sits in the intake path ahead of the H13A combination filter cassette and retains cooled sticky aerosols before they reach the HEPA stage.

Benefits

• Pack of 10 mats under ULT number 4-00241, so change intervals can be kept without reordering
• Mat M5-02 rated ISO Coarse 85% to ISO 16890, mat F7-02 rated ISO ePM10 75%
• Depth-loading medium spreads the particle load through the volume of the mat instead of only across its surface
• 240 x 240 x 20 mm format, ready to insert with no cutting
• Short prefilter change intervals keep the H13A combination filter cassette (4-00075) working for a long time

Technical data

Applications

Routine maintenance of solder fume extraction at manual and robotic soldering stations as well as at desoldering and repair cells. A change is due when the particulate filter loading indicator comes on or capture at the nozzle weakens. In multi-shift production a pack of ten usually covers the demand of one unit for a long period.

Compatibility and scope of delivery

The ULT 160.1 and ULT 200.1 technical documentation lists the M5-02/F7-02 mats as a set of 10 under 4-00241 and assigns them to the solder fume builds LRA 160.1 MD.11 K and LRA 200.1 MD.20 K. Scope of delivery: 10 filter mats in classes M5-02 and F7-02.