PP partitions ESD for 600 x 400 mm containers, 553 x 353 x 80 mm, 15 long and 21 short dividers - Warmbier 5420.G1.80

Small parts and populated assemblies lying loose in a storage container rub against each other and have to be searched for. This plug-in system divides the container area into up to 280 single compartments of 23 x 20 mm and is made entirely of permanently volume-conductive polypropylene, so the whole set of partitions stays at one potential.

Benefits

• Up to 280 single compartments from 20 x 14 rows, every part gets a fixed place
• Variable plug-in system, pulling out single long or short dividers creates larger compartments without a new set
• Permanently volume-conductive polypropylene at typically 10^4 - 10^5 Ohm, the conductivity is in the material, not in a coating
• Hollow chamber profile with 3 mm material thickness and 550 g/sqm weight per unit area, stiff at low dead weight
• High abrasion resistance, the dividers survive frequent rearranging and cleaning
• Height 80 mm and footprint 553 x 353 mm for standard storage containers of 600 x 400 mm

Application

Order inside storage containers at placement, test and rework benches within the EPA, and transport protection so that parts do not knock together while the trolley is moving. Compartment size is matched to the part by pulling single dividers, long components keep whole rows open.

Scope of supply

Longitudinal dividers: 15 x part no. 5420.553.23.80, 553 x 80 x 3 mm. Short dividers: 21 x part no. 5420.353.20.80, 353 x 80 x 3 mm.