PreciForce crimping pliers for uninsulated open connectors 4.8 + 6.3 mm, 0.5 to 6.0 mm², 220 mm - Knipex 97 52 35

Anyone attaching 4.8 or 6.3 mm tab connectors to stranded wire needs a repeatable crimping force. The PreciForce crimping pliers 97 52 35 work with a factory calibrated crimping pressure and cover 0.5 to 6.0 mm² with three dies.

Benefits

• Precision dies and an unlockable ratchet keep the crimping quality identical from stroke to stroke, the ratchet releases the handles only after a complete crimp.
• The crimping pressure is calibrated at the factory, so no setting is needed on site.
• Efficient lever action delivers a high crimping force with little effort at the handles.
• Three dies cover 0.5 to 6.0 mm², which corresponds to AWG 20 to 10.
• Short design, favourable handle position and ergonomically shaped multi-component grips at 494 g make longer runs easier.
• The crimping die is built in and not exchangeable, which removes any set-up time and rules out using the wrong die.

Areas of use

Vehicle electrics, control cabinet and control system building and service work on wiring harnesses, wherever uninsulated open connectors with 4.8 or 6.3 mm tab width are processed. The fixed calibration also suits work that has to be documented.

Standards and conformity

The manufacturer does not state a tool standard for this model. According to the manufacturer the tool contains substances of very high concern under REACH. The RoHS directive does not apply.