The product may differ from the illustration
Bevelled soldering tip cartridge from the Metcal STTC series with 1.78 mm tip width and 6.4 mm length. The 485 °C grade is made for ceramic substrates and large thermal masses. The bevel picks up solder and releases it evenly onto the pads while dragging.
Soldering tip cartridge bevelled 60° 1.78 x 6.4 mm 485 °C STTC series - Metcal STTC-847P
METCAL Original product
Net price (excl. VAT)
€27.99
Item WL27944
Manufacturer no. STTC-847P
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.STTC-847P
ConditionNew
Article
WL27944
Frequently Bought Together
- This Item: €27.99
- Soldering tip chisel 30° 1.78 x 6 mm STTC series - Metcal STTC-037 €27.99
- Soldering tip chisel 2.5 mm optimised geometry STTC series - Metcal STTC-136P €27.99
Total price
The 60° bevelled soldering tip cartridge STTC-847P holds a solder reservoir on its 1.78 mm bevel, which suits drag soldering and joints that pull away a lot of heat. The working temperature is 485 °C.
Benefits
- 60° bevel with 1.78 mm width for drag soldering
- Working temperature 485 °C for thermally demanding joints
- Suitable for ceramic substrates and large thermal masses
- Optimised geometry for best thermal performance
- Matches MX-500, MX-5000 and MX-5200
Technical data
| Item number | WL27944 |
| Model | STTC-847P |
| Manufacturer | Metcal |
| Manufacturer item number | STTC-847P |
| Product series | STTC series |
| Tip alignment | bevelled 60° |
| Tip width | 1.78 mm |
| Tip length | 6.4 mm |
| Tip temperature | 485 °C |
| Suitable handpiece | MX-H1-AVA, MX-RM3E |
| Order unit | piece |
| Weight | 0.1 kg |
Applications
Drag soldering of SMD rows, rework on connector strips as well as ceramic substrates and parts with a large thermal mass.
Compatibility and scope of delivery
The cartridge fits the MX-H1-AVA and MX-RM3E handpieces and runs on the MX-500, MX-5000 and MX-5200 power units. Scope of delivery: 1 soldering tip cartridge STTC-847P.
The Metcal SmartHeat system holds the working temperature without calibration and without a temperature setting, and the tip can be grounded for ESD workplaces to IEC 61340-5-1.
| Manufacturer Nr. | STTC-847P |
|---|---|
| Manufacturer | Metcal |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
Write Your Own Review
Customers Who Bought This Item Also Bought