Self-adjusting crimping pliers for wire ferrules 0.08 to 16 mm² with front loading, 190 mm - Knipex 97 53 09

Crimping one ferrule after another in a control cabinet costs time when the right locator has to be found each time, and it invites faulty crimps. The 97 53 09 self-adjusting crimping pliers adapt automatically to the ferrule size and crimp 0.08 to 10.0 mm² as well as 16.0 mm² in a single profile.

Benefits

• Self-adjusting adaptation to the required ferrule size rules out wrong crimps caused by using the wrong die.
• The ferrules are inserted frontally into the tool, which helps in cramped terminal compartments.
• One profile for 0.08 to 10.0 mm² and 16.0 mm², switched over with a selector lever.
• Repeatable crimping quality thanks to an unlockable ratchet mechanism and factory-calibrated crimping pressure.
• Efficient lever action provides a high crimping force, combined with a handy shape at 190 mm and 486 g.
• UL approved crimping together with the Knipex wire ferrules 97 99 330 to 97 99 399.

Areas of use

Control cabinet and control system building, electrical installation, plant wiring and service work. It pays off wherever fine-stranded conductors of changing cross-sections are prepared one after another and every tool change would cost time.

Standards and conformity

The pliers crimp wire end ferrules according to DIN 46228 parts 1 and 4. Together with the Knipex wire ferrules 97 99 330 to 97 99 399 the crimp is UL approved. According to the manufacturer the tool contains substances of very high concern under REACH, and the RoHS directive does not apply.