Power unit 60 W SmartHeat with integrated vacuum pump 0.7 bar, MFR-1300 series - Oki MFR-PS1300

Multilayer assemblies with ground planes need heat that flows back the moment the tip touches down and a vacuum that genuinely clears the plated through hole. The Oki MFR-PS1300 combines SmartHeat induction control with up to 60 W output and an integrated pump giving 0.7 bar suction in one standalone unit of the MFR-1300 series.

Benefits

• Up to 60 W output with SmartHeat induction control at 450 kHz for heat-hungry joints
• Integrated vacuum pump at 0.7 bar, no separate compressed air supply needed
• Tip temperature accuracy to IPC J-STD-001, idle temperature stability 1.1 °C in still air
• ESD-conscious design with tip-to-ground potential below 2 mV and tip-to-ground resistance below 2 ohms
• Wide range input 100 - 240 VAC and noise level below 55 dB for use at any bench

Applications

Desoldering and rework on multilayer boards, clearing plated through holes, replacing connectors and components in repair, small series production and test laboratories.

Compatibility and scope of delivery

Power unit of the Oki MFR-1300 series for the handpieces of that series, among them the MFR-H5-DS desoldering tool, which can be held with a pen grip or as a gun using the clip-on holder. Works with SxP soldering cartridges, RxP rework cartridges and DxP desoldering cartridges. Delivery comprises the power unit with power cord.

The ESD figures of the unit suit operation inside an EPA set up to IEC 61340-5-1.