Solder fume extraction unit 80 m³/h at 1,900 Pa, 2 ports DN50 - WSA-10LR

A compact bench unit for one or two soldering positions: the WSA-10LR collects flux vapours through two DN50 intake ports and runs at 80 m³/h against 1,900 Pa. Volume flow is adjusted steplessly to the nozzle and hose length, and the optical indicator signals when the filter is due.

Benefits

• 2 intake ports DN50, rated for 1-2 workstations
• Nominal flow of 80 m³/h at 1,900 Pa, up to 190 m³/h maximum, vacuum up to 3200 Pa
• Quiet at 45-49 dBA and economical with a 0.15 kW EC drive
• Three-stage filtration: optional expanded metal filter, M5/F7 filter mat, H13A combination cassette with 99.95 % efficiency and activated carbon
• Stepless volume flow control and particle filter loading indicator

Applications

Extraction and filtration of solder fume, gases and vapours in non-explosive air mixtures. Typical use is at hand soldering benches, in repair and rework, and at test positions with occasional soldering. Recirculated-air operation saves heating energy but is not permitted for carcinogenic, mutagenic or reprotoxic substances.

Compatibility and scope of delivery

Delivered as the WSA-10LR extraction unit with two DN50 connection ports, EC blower, volume flow controller, filter loading indicator and installed filter combination. Extraction arms, funnel nozzles and hoses for 50 mm connection are available separately. Consumables are the M5/F7 filter mat combination and the H13A combination filter cassette.

The HEPA element corresponds to filter class H13 to EN 1822 with a separation efficiency of 99.95 %.