Extraction unit LRA 300 HD.13 K for solder fume 200 m³/h at 7,500 Pa - ULT LRA 0300.0-HD.13.11.6005

Where capture happens through slim nozzles, funnels or long hose runs, the flow of a medium pressure unit collapses. The ULT LRA 300 HD.13 K instead uses an EC turbine delivering 200 m³/h at 7,500 Pa and building vacuum up to 12,000 Pa. The filter train remains the storage filter chain of the series: expanded metal filter, M5/F7 filter mat set and an H13A combination cassette holding the H13 particulate filter and activated carbon.

Benefits

• EC turbine for point extraction, 200 m³/h at 7,500 Pa, vacuum up to 12,000 Pa
• Four stage filtration up to H13 with activated carbon for recirculating operation
• Maintenance-free 1.3 kW EC drive with adjustable volume flow
• SUB D9 interface with remote on/off, operating signal and filter loading indicator
• Noise level 60-71 dBA at 50 to 100 percent output
• IP54 protection, the only series 300 version approved for the ATEX certified NT125 spark arrestor

Applications

Point extraction directly at the soldering tip, capture at desoldering and rework cells, extraction on laser marking systems and dispensing robots. Wherever the capture cross section is small and the pressure drop high, the high pressure version outperforms the medium pressure unit.

Compatibility and scope of delivery

Delivered as an LRA 300 series extraction unit with the main filter module fully equipped. The storage filters are changed once saturated, the expanded metal filter and the M5/F7 mat set are also available individually. For sparks from grinding or cutting work ULT approves the NT125 spark arrestor ULT 3-00009 for 200 to 400 m³/h, it is intended for HD.13 units only and ships with two pipe clamps. The accessory range further covers DN 50 and DN 75 extraction hoses, the U-profiles ULT 9-00068 and ULT 9-00069 for arm mounting and the operating hours counter ULT 9-00136.