Soldering tip hook long 30° fine 0.51 mm, T series - Thermaltronics TM80MD575

Jumper wires, mod wires and component leads under the microscope call for a tip that guides the wire instead of pushing it away. The TM80MD575 uses a hook geometry with only 0.51 mm of working width, set at 30°.

Benefits

• Hook shape holds thin wire at the joint while the solder flows
• 0.51 mm fine tip for the pitches met in QFN and BGA rework
• Long 15.4 mm tip at 30° for a flat working angle
• T cartridge at 420-475 °C with fast heat recovery despite low tip mass
• Lead-free and RoHS compliant

Applications

Microsoldering under a stereo microscope, fitting and removing jumper wires, prototype modifications on boards and rework of individual fine pitch pins.

Compatibility and scope of delivery

For the SHP-T hand piece of the TMT-5000S-1 and TMT-5000S-2 stations. Supplied as one TM80MD575 soldering cartridge.