Electronics diagonal cutter with small facet, piano wire up to 0.3 mm, 125 mm - Knipex 75 22 125

When populating and repairing printed circuit boards the wire has to be cut flush and free of burrs without harming neighbouring components. The 75 22 125 electronics diagonal cutter offers a small facet, a head only 10.5 mm wide and ground cutting edges of around 62 HRC.

Benefits

• Sharp ground cutting edges for soft wire from 0.2 to 1.3 mm and hard wire up to 0.4 mm.
• Cutting edges additionally hardened by induction, edge hardness around 62 HRC, which also covers piano wire up to 0.3 mm.
• Small facet for cuts close to the board surface.
• Low-friction double spring opens the tool softly and evenly, which relieves the hand during long cutting runs.
• Slim head 10.5 mm wide with 14 mm jaw length reaches between closely spaced components.
• Pliers burnished, handles with plastic sleeves, total weight only 79 g.

Areas of use

Electronics production and board assembly, repair and service work on modules, precision mechanics, laboratory and model making. The small facet pays off wherever component leads are cut just above the board.

Standards and conformity

The diagonal cutter is built to DIN ISO 9654. According to the manufacturer it contains no substances of very high concern under REACH. The RoHS directive does not apply to this product.