ESD grounding tile X-LOG with earthing point, PVC, light grey RAL 7004, smooth, 497x497x7 mm, 1 piece - Ecotile 16.1043HG/7MM

An Ecotile ESD floor needs one grounding tile per 60 m². This 7 mm tile in the 497 × 497 mm format clicks into the floor like any other tile, links the conductive grounding tape of the area to earth and is connected by an earthing cable to an earthing plug or earthing rail as described in the installation instructions.

Advantages

• Controlled discharge: resistance above 3.4 × 10⁴ Ω up to 5.0 × 10⁶ Ω, body voltage below 100 V
• Few connection points: one grounding tile per 60 m² combined with the conductive grounding tape
• Click-and-use installation with the X-LOG joint, which the manufacturer calls X-Joint, tile size 497 × 497 mm
• Safe in daily use: slip resistance R10, fire rating Bfl-s1, good chemical resistance to EN 13529
• Permanent conductivity from PVC with stainless steel microfibres, 10-year warranty and lifetime warranty on ESD performance

Applications

Grounding of ESD floors made of Ecotile interlocking tiles of the same thickness in EPAs for electronics production, repair and test stations, laboratories and stores for ESD sensitive components. According to the manufacturer the floor reduces dust and noise and insulates against cold and moisture from the subfloor.

Standards and quality

According to the manufacturer the X500 ESD tiles comply with BS EN 61340-5-1, IEC 61340-5-1 and ANSI/ESD S20.20-2014. The stated test standards are EN 1081 for electrical resistance and EN 1815 for body voltage. Made in the United Kingdom to ISO 9001 from REACH compliant PVC.