Compact bolt cutters CoBolt XL, straight cutting edges, hard wire 4.0 mm dia., 250 mm - Knipex 71 01 250

Bolts, nails and hard wire often call for full body weight when cut with a diagonal cutter. In a length of 250 mm the CoBolt XL compact bolt cutters put a 40-fold increase of manual force on the blades and so save about 60% effort compared with conventional high leverage diagonal cutters.

Benefits

• 60% less effort required than with conventional high leverage diagonal cutters, noticeable on every cut.
• 40-fold increase of manual force due to the special joint design, so hard wire up to 4.0 mm dia. and piano wire up to 3.8 mm dia. are within reach.
• Two-hand operation for maximum cutting force, also on larger cross-sections and very hard materials.
• Induction hardened precision blades with a cutting edge hardness of approx. 64 HRC.
• Straight cutting edges for easier cutting of flat material, also suitable for thin round material.
• Gripping surface below the joint for gripping and pulling wires from 1.0 mm dia.

Technical data

Areas of use

Metalworking, assembly and maintenance, fence and mesh work, electrical installation and strip-out jobs. Wherever bolts, nails, rivets, screws, springs and wire have to be cut and the tool still has to fit into the tool pouch.

Standards and conformity

According to the manufacturer the article contains substances of very high concern as defined by the REACH regulation. The RoHS directive does not apply to this product. The manufacturer states no further standards for this article.