Knipex
Die set for turned ABS contacts from Tyco Electronics, 2.5 to 6 mm², 2 nests - Knipex 97 49 64
Item WL61977
€193.09
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Die set for turned contacts Harting HAN C, 1.5 to 6 mm², AWG 16 to 10 - Knipex 97 49 61
Exchangeable crimping die for turned contacts, for example Harting HAN C®, the Ilme CX series and the Phoenix Contact CK4.0 series. It covers the conductor sizes 1.5 / 2.5 / 4 / 6 mm² or AWG 16 to 10. The die fits the KNIPEX crimp system pliers of the 97 43 xx range and weighs 46 g at 50 x 17 mm.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
In rectangular connectors carrying power, the crimp decides on heating and reliability. The crimping die 97 49 61 crimps turned contacts in the conductor sizes 1.5 / 2.5 / 4 / 6 mm², which corresponds to AWG 16 to 10. The die measures 50 x 17 mm and weighs 46 g.
Benefits
- For turned contacts such as Harting HAN C®, the Ilme CX series and the Phoenix Contact CK4.0 series.
- Four conductor steps 1.5 / 2.5 / 4 / 6 mm² or AWG 16 to 10 in a single die.
- Exchangeable: the same crimp system pliers carry on working with every die of the 97 49 xx range.
- At 46 g and 50 x 17 mm handy enough for work directly at the control cabinet.
- According to the manufacturer free of substances of very high concern under REACH.
Areas of use
Control cabinet and machine building, plant wiring, assembly of rectangular connectors for higher currents as well as service and maintenance.
Standards and conformity
According to the manufacturer the product contains no substances of very high concern under the REACH regulation. The RoHS directive does not apply to this product.
Technical data
| EAN | 4003773045137 |
|---|---|
| Weight | 46 g |
| Dimensions | 50 x 17 mm |
| Application | turned contacts (e.g. Harting HAN C®, Ilme CX series, Phoenix Contact CK4.0 series) |
| Capacity | 1.5 - 6 mm² |
| AWG | 16 - 10 |
| REACH conformity | contains no SVHC |
| RoHS conformity | not applicable |
| Manufacturer | Knipex |
| Manufacturer Nr. | 97 49 61 |
| HS-Code | 82032000 |
| GPSR manufacturer information | KNIPEX-Werk Oberkamper Strasse 13 DE-42349 Wuppertal-Cronenberg www.knipex.de |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Germany |
| Width | 17 mm |
| Overall length [mm] | 50 |
Downloads
Accessories
Knipex
Die set for turned contacts Harting and HTS, 0.14 to 4 mm², 4 nests - Knipex 97 49 60
Item WL61973
€140.03
Knipex
Crimping die for Amphenol Helios H4 PV connectors, 2.5 to 10 mm², 3 nests - Knipex 97 49 59
Item WL61972
€132.96
Knipex
Die set for coax connectors RG 58, RG 174, RG 188, RG 316, 6 nests - Knipex 97 49 50
Item WL61970
€109.76
Videos
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
Customers Who Bought This Item Also Bought
Knipex
Crimping die for insulated and non-insulated wire end ferrules, 0.25 to 6.0 mm² - Knipex 97 39 08
Item WL61947
€50.04
Knipex
Crimp system pliers for exchangeable crimping dies 97 49 XX, without die, 200 mm - Knipex 97 43 200 A
Item WL48288
€99.20
Knipex
Crimping die for uninsulated cable lugs and connectors, 16 and 25 mm², 2 nests - Knipex 97 49 23
Item WL61961
€58.67
Knipex
Crimping die for insulated cable lugs and connectors, 10 and 16 mm², 2 nests - Knipex 97 49 16
Item WL61958
€60.14
Knipex
Die set for Molex Micro-Fit 3.0 connectors, AWG 30 to 20, 50 x 12 mm - Knipex 97 49 25
Item WL61963
€239.61
