WXsmart soldering station set 300 W with WXUPS MS ultra iron 150 W - Weller T0053455699

Large ground planes pull heat away faster than a standard iron can replace it. The WXUPS MS ultra iron puts 150 W at 24 V into the joint through Thermal Core technology, with a heat-up time of 7 seconds. The WXsmart station drives two channels with 300 W in total.

Benefits in use

• Up to 150 W at 24 V at the tool, suitable for component sizes from 1612 upwards and larger joints.
• Heat-up time of 7 seconds with a short recovery, the Active-Tip cartridge sits right behind the tip.
• Smart tips with an individual serial number give full traceability of the calibration history.
• Up to 10 parameter sets stored in the iron, including standby temperature and automatic switch off.
• The station serves two soldering channels with 300 W and hosts 12 tools in total, so no second station is needed.
• Colour touch screen, TLS encryption and two factor authentication for a networked workstation.

Applications

Electrical industry, medical technology, automotive and aerospace. Wherever ground connections, connectors and large components have to be heated through reliably.

Compatibility

The WXUPS MS ultra iron works with the RTUS MS tip series. The WXsmart supply unit carries two soldering channels and accepts up to 12 tools.

Standards and compliance

The station and the connected tools are ESD safe. The manufacturer lists this set under the MIL-SPEC specification.