EPA E10 particle filter with activated carbon foam 140 x 140 mm for ZeroSmog Shield - Weller FT91000046

Solder fume carries particles and gaseous flux components, so a dust filter alone falls short. This compact filter for the ZeroSmog Shield combines both stages in a single 140 x 140 x 23 mm element and removes 85 percent of the particles at EPA E10 level.

Benefits in use

• Particle and gas stage in one part, both are exchanged in a single step.
• EPA E10 particle stage with 85 percent removal directly at the soldering bench.
• Gas stage of foam impregnated with activated carbon, the large surface takes up flux vapours.
• Overall size 140 x 140 x 23 mm, the filter fits the ZeroSmog Shield filter bay exactly.
• ESD safe design for benches run to EPA requirements.
• Sold as one piece, which makes spare demand per extraction unit easy to plan.

Technical data

Applications

Manual soldering benches in electronics production, repair and laboratory work where the ZeroSmog Shield draws the fume off at the point of origin. Change the filter as soon as airflow drops noticeably or odours break through.

Compatibility and scope of delivery

Suitable for the Zero Smog Shield and Shield Pro extraction units according to the manufacturer. One filter element is supplied, no tool is needed for the change.