PCB support L1 in metal, working height 24 mm, for PHXLS preheater - JBC PH204

Large boards sag over the preheater as soon as the heat softens the material. The PH204 metal support sits between the board and the preheater and props up the assembly at a working height of 24 mm.

Benefits

• 24 mm working height keeps the board at the distance above the heating surface intended for the PHXLS set-up.
• A support point against sagging, so components and joints are not put under mechanical stress while preheating.
• Metal version measuring 23 x 10 x 50 mm, small enough to spread several supports under one large assembly.
• Supplied individually, so the number of support points can follow the size of the board.

Technical data

Applications

Rework and repair on large and multilayer assemblies, preheating before component removal and repetitive soldering work with the same fixture.

Compatibility

Intended by the manufacturer for the PHXLS set-up, positioned between the board and the preheater.

Note

The property table does not list the support as ESD safe.