RS 180 Slotted Wall 300 with type 022 base stop, non-reinforced, 255 x 22 x 180 mm

When populated boards are buffered and moved, the holder decides whether two cards end up touching. The slotted wall 300 of the RS 180 rack system takes every board in its own groove and keeps it upright, the outer size is 255 x 22 x 180 mm. The type 022 base stop is part of the article and limits the insertion depth at the bottom.

Benefits

• Non-reinforced version, the slimmer of the two variants in this range. For heavier duty the same wall is available reinforced.
• Type 022 base stop included, the insertion path ends at a defined point and the board cannot slide through.
• Outer size 255 x 22 x 180 mm, the wall fits the grid of the RS 180 rack system and can be combined with further walls into a magazine.
• Own weight 0.1 kg, a loaded magazine can still be moved by hand.
• Available singly, minimum order quantity 1 piece with no step size, so existing magazines can be extended piece by piece.

Application

The wall is used wherever boards wait between two operations, as a buffer at the placement line, for internal transport to test, and for interim storage ahead of final assembly. Inside the EPA every card stays individually guided, so edges and components do not knock against each other.