Solder fume extraction kit with HEPA 13/gas filter, extraction arm and two nozzles for 2 stations - Oki BVX-250-KIT

Setting up a new extraction point takes more than the unit itself, it needs an arm and nozzles too. The Oki BVX-250-KIT combines the BVX-250 extractor with the BVX-ARML arm (5 ft) and the BVX-NOZC and BVX-NOZR nozzles. The unit extracts at two stations with 75 m³/h each and filters through a pre-filter, HEPA 13 at 99.97 % efficiency and a gas stage.

Key benefits

• Ready to use: unit, arm and two nozzle shapes in one kit.
• Two workstations on one unit: 2 x 75 m³/h flow, up to 297 m³/h free blowing.
• HEPA 13 with 99.97 % efficiency plus a gas and activated carbon stage for fumes, particles and vapours.
• Filter change in about 30 seconds, the pre-filter protects the main filter from coarse dust.
• Quiet operation below 55 dBA at the medium of three power levels.
• LED status ring and a 360° rotatable, removable air deflector. Small footprint for use on or under the bench.

Applications

Hand soldering, rework and bonding at one or two workstations in electronics production, repair, laboratories and training.

Compatibility

Further BVX and Omniflex arms and hoses can be connected, for example for the second workstation. Replacement filters: pre-filter FP-BVX250, main filter FM-BVX250 and deep-bed gas filter FG-BVX250.

Standards and compliance

Safety conformity to UL and CSA, UKCA, KC, PSE, NOM, CE (ISO 14644) and TÜV.