Solder fume extraction ZeroSmog Guard 100 m³/h with filter status indicator, one seat - Weller FT91021699

A clogged filter no longer cleans the air, yet it rarely gets noticed. The ZeroSmog Guard therefore monitors filter condition and reports it on a light bar while pulling solder fume from the source with 100 m³/h and 2700 Pa. The unit serves one workstation and draws 74 W from 220 to 240 V.

Key benefits

• The main filter with HEPA H13, activated carbon and potassium permanganate covers particles and aggressive gases alike.
• Filter status indicator and light bar show operating state and the due filter change.
• 2700 Pa of vacuum and 100 m³/h of volume flow keep capture stable at one soldering position.
• Pre-filter and main filter change without tools, and five ePM1-75 % pre-filters are included.
• Connects to the Weller Easy-Click 60 hose system for arms and nozzles.
• ESD-safe design with an easily accessible on and off switch.

Technical data

Applications

Hand soldering benches in electronics production, repair and test areas, laboratory and prototype work as well as training positions. The unit stands under or next to the workbench and serves one workstation.

Connection and scope of delivery

Connection uses Weller Easy-Click 60 with a 60 mm plug fitting. Extraction arm, nozzle and shut-off valve are not included. Supplied are the 230 V filter unit, one main filter with HEPA H13, activated carbon and potassium permanganate plus five ePM1-75 % pre-filters.

Manufacturer and compliance

ESD-safe design for electronics workplaces according to the manufacturer's specification table. The manufacturer is WELLER Tools GmbH, Carl-Benz-Strasse 2, DE-74354 Besigheim, Germany.