Cordless soldering station B-IRON with B.NANO nano tool and 8.6 inch display, 15 W - JBC BIN-5B

A cable on the iron gets in the way exactly where millimetres matter, under a magnifier and on assemblies that are hard to reach. The B.NANO tool weighs 35 g, works without a cable and manages up to 120 small SMD joints per charge. The short distance between tip and grip gives control on delicate work, and the supplied 8.6 inch display shows temperature and profiles through the B.IRON app.

Key benefits

• B.NANO nano tool with 15 W peak power, a short distance between tip and grip for control on delicate work.
• Up to 120 small SMD joints per battery charge, charging time of 30 minutes, Li-Ion battery of 7.4 V and 120 mAh.
• Temperature selectable from 100 to 450 °C with an accuracy of three percent using a reference cartridge.
• Fully compatible with the C115 cartridge range, quick cartridge changer on the stand.
• The BCB charging base charges the tool automatically once it sits in the holder, energy saving mode through the cap.
• Stand with brass wool tip cleaner and splash protection membrane, input voltage of 100 to 240 V at 40 W.
• Portable 8.6 inch display with the B.IRON app included, connected over Bluetooth 5.0, battery of 3.7 V and 5000 mAh.

Applications

Rework and repair on densely populated assemblies, work under a magnifier, service jobs away from the bench and prototyping with small SMD parts.

Compatibility and scope of delivery

Compatible with the C115 cartridge range. The delivery contains the B.NANO nano tool, the BCB charging base, the HPTE0C9SA high precision tweezers with ESD epoxy coating and the portable 8.6 inch PDS display with the B.IRON app. The system measures 202 x 200 x 211 mm at 2.15 kg, packed 265 x 243 x 160 mm at 2.72 kg.

Standards and compliance

The tool complies with ANSI/ESD S20.20 and all B.IRON components meet CE standards. The tool itself is not grounded, so the operator has to be grounded in line with ESD requirements.