ESD rework station with DDE 2 channel control unit, T245, DR560 and MSE module - JBC DDSE-2QF

At 6.07 kg net and 232 mm wide the DDSE station stays compact on a repair bench while still covering both jobs. The T245 general purpose handle solders with up to 150 W peak power, the MSE module desolders at 85 % vacuum. The DDE control unit runs both tools at the same time.

Key benefits

• The cartridge type decides compatibility. The T245 handle takes cartridges of the C245 range, the DR560 works with desoldering tips of the C560 range.
• Two channels on the DDE control unit, compatible with 13 different JBC tools, so swapping tools needs no rebuild.
• 150 W peak power per tool at 200 W rated power, working range 90 to 450 °C.
• At idle the tip temperature stays stable to ±1.5 °C, which meets IPC J-STD-001F.
• The MSE module draws with 42 W, 85 % vacuum and 35 SLPM flow, controlled by pedal if wanted.
• USB-A takes firmware, graphics and profiles and connects a Dino-Lite USB microscope of models AM2011 and AM2111, USB-B goes to the PC and RJ12 drives extraction, peripherals or robots.

Applications

Repair and rework on assemblies, desoldering through hole components, test areas and service workshops, and benches where two tools are enough.

Compatibility and scope of delivery

The delivery covers the DDE control unit for two tools, the T245 general purpose handle for the C245 cartridge range, the DR560 desoldering iron for the C560 tip range and the electric MSE desoldering module.

Standards and compliance

The station complies with CE standards and is built ESD safe. Voltage and resistance between tip and ground meet and exceed ANSI/ESD S20.20 and IPC J-STD-001F. Manufactured by JBC Soldering SL in Molins De Rei, Spain.